Home ] Publications Catalogue ]

 

FORMBLOCK Catalogue

 

 

Packaged Kits

For sales

 

*Prices quoted are valid from the 12th September 2010 and are subject to change without notice.

Code

Formblock Kits Price List

Retail prices for Australian Buyer's G.S.T. included.

 

 

 

 

 

HWK

Handy Wall Kit includes: 

5 x Partition Clamps,    5pairs Standard 600mm Shutters,    2pairs Half-sized 300mm Shutters,  

2 x End Clamps,    1 Rebate Insert,     2pairs Starter Pegs,   1 Bay Clamp

and  Formblock Assembly Instructions and Brief Building Guide book

This 5 block kit will produce up to a 3 metre (10 feet) long course at a time. A bare essentials that would suit a sole operator with a casual approach to projects..

 

$1,880-00

 

 

BWK

Basic Wall Kit includes:  

10 x Partitions Clamps,   10pairs Standard 600mm Shutters,    2pairs Half-sized 300mm Shutters,   

 2 x End Clamps,    2x Rebate Insert,    2pairs Starter Pegs,   1 Bay Clamp.

and  Formblock Assembly Instructions and Brief Building Guide book

This 10 block kit will produce up to a 6 metre (20 feet) course at a time. a cost effective range of essential formwork for projects with emphasis on straight walls with fewer corner sections and would suit a sole operator.

 

$3,130-00

 

 

SOK

Solo Building Kit includes: 

10x Partitions Clamps,   8pairs Standard 600mm Shutters,      2pairs Half-sized 300mm Shutters,

 1x Corner Shutter Set*,  2x End Clamps,   2pair Starter Pegs,   1 Rebate Insert

and  Formblock Assembly Instructions and Brief Building Guide book.

 

* Corner Shutter Sets include;  Left & Right Inner and Outer Corner Shutters, 2 pair of  525mm Shutters (matched for 600mm centre), 1pair 225 Shutter (matched for 300mm centre) 2x Bay Clamps.

This 10 block kit will produce up to a 6 metre (20 feet) course at a time. A full complement range of formwork for projects that include more than a few corners. Would suit a sole operator with a productive approach to projects.

 

$3,620-00

 

 

SPK

Solo Plus Building Kit includes: 

14x Partition Clamps,    10pairs Standard 600mm Shutters,     2pairs Half-sized 300mm Shutters,   

1x Corner Shutter Set*,    2x  End Clamps,     2pair Starter Pegs,    2x Rebate Inserts

and  Formblock Assembly Instructions and Brief Building Guide book.

 

*Corner Shutter Sets include;  Left & Right Inner and Outer Corner Shutters,  2 pair of  525mm Shutters (matched for 600mm centre),  1pair 225 Shutter (matched for 300mm centre)   2x Bay Clamps.

This 14 block kit will produce up to a 8.4 metre (28 feet) course at a time.  A full complement range of formwork that would suit one to two operators with a productive approach to projects.

 

$4440-00

 

 

SHK

Standard Home Building Kit includes:  

24x Partition Clamps,    20pairs Standard 600mm Shutters,     4pairs Half-sized 300mmShutters,  

1x Corner Shutter Set*,   2x End Clamps,    2pairs Starter Pegs,    4x Rebate Inserts.

and  Formblock Assembly Instructions and Brief Building Guide book.

*Corner Shutter Sets include;  Left & Right Inner and Outer Corner Shutters,  2 pair of  525mm Shutters (matched for 600mm centre),  1pair 225 Shutter (matched for 300mm centre)   2x Bay Clamps.

This 24 block kit will produce up to a 14.4 metres (48 feet) course at a time.  A full complement range of formwork that and would suit a team of two operators. This kit would be recommended as a cost effective approach to good productivity in a project  when considering using hired labour, or if using some heavier mechanisation for producing and pouring larger amounts of mix.

 

$6990-00

 

 

 

 

 

 

 

 

 

 

Additional Individual Components

 

Code

Components

Retail prices* for Australian Buyer's included G.S.T.

 

PC1

 Partition Clamp

$145

 

EC1

 End Clamp

$145

 

S1

1 pair, Standard 600mm Shutters

$98

 

S2

1 pair, Half-sized 300mm Shutters 

$76

 

S3

1 pair, Third-sized 225mm Shutters (matched for 300 mm centres with Corner Shutter Sets)

$73

 
S4 1 pair, Three Quarter-sized 525mm Shutters (matched for 600 mm centres with Corner Shutter Sets)

$94

 

CL1

 Corner Shutter Set Left hand includes:

 Inner and Outer Shutters, 1pair 525mm Shutters (matched for 600mm centres) and Bay Clamp

$350

 

CR1

 Corner Shutter Set Right hand includes:

 Inner and Outer Shutters, 1pair 525mm Shutters (matched for 600mm centres) and Bay Clamp

$350

 
       
SB1  Single Bay Set includes:

         1 Partition Clamp and 1pair of Standard 600mm Shutters (required to produce an additional block with existing kits)

$240

 
CCS1  Complete Corner Shutter Set  includes; 

         Left & Right Inner and Outer Corner Shutters,  2pair of  525mm Shutters (matched for 600mm centre),                           1pair 225 Shutter (matched for 300mm centre)   2x Bay Clamps.

$753

 

BC1

 Bay Clamp

$58

 

R1

 Rebate insert

$25

 

SP1

 Starter Pegs (Pack of two)

$29

 
ACS1  Aluminium Shutter Clamp Strips (Pack of four, included fasteners)

$54

 

SP1  Steel Shutter Beading Made to order, 300mm unit (pair), includes fasteners

$6

 
   Custom Designed Shutters: i.e. Other angles or curved forms can be produced, however will often require the consideration to achieve an alternative block pattern for every other course.

P.O.A.

 

*Prices quoted are valid from the 12th September 2010 and are subject to change without notice.



Pre-Owned Formblock Formwork Listings

Once you have completed your project and you have no more need for the Formblock formwork, we will buy back, at our discretion, your kit, if in good order, at 35% less freight costs.  Or post an advert here for you to on sell your kit to someone in your region.

 

 

There are currently no second-hand kits for sale

 

 

 

 

 To take up the buy back option, or to arrange an advert, contact us using this e-mail link enquiries@formblock.com.au or phone 0418 404 200 (Gary McGuigan)


 

For Sales

To place an order for purchase, please choose one of the options below.

 No payment is required at this stage. 

Once an order has been received, we will send you a confirmation of the order and an order number. 

 

Options;

Place order by E-mail

 enquiries@formblock.com.au 

or

Telephone:  0418 404 200 (Gary McGuigan)

Postal Address: Formblock Australia Pty Ltd

70 Highland St   Leura 

New South Wales, Australia.

 Post code 2780

 


Copyright FORMBLOCK Australia Pty Ltd 2001 A.B.N. 85 072 393 956.